Overview

Ronseal Quick Dry Radiator Spray Paint is an easy to use, tough and heat resistant spray. It will protect against knocks, scuffs and scrapes and give your radiators a brilliant white enamel finish. There’s no need for a primer and its simple spray application gives a flawless finish that can be recoated in as little as 30 minutes.

• Smooth and tough enamel finish
• Heat resistant
• No primer needed
• Won’t yellow over time

Preparation

Ensure your radiators are clean and free from dirt, grease and other loose material.

• Radiators must be off and completley cold before you start painting.
• Put down dust sheets to protect the floor and mask off the surrounding areas to avoid overspray.
• We recommend you open the doors and windows for added ventilation.
• Gently sand the radiators with a fine grit paper to give a key for the paint.
• Remove all dust.

Application

Before applying shake the can and test a small area to ensure you are happy with colour and adhesion.

• Shake the can well untill you hear a rattle, then continue to shake for another minute.
• Hold the can approximatley 20-30cm away from surface.
• Spray in a smooth sweeping motion.
• Avoid over spraying as this can cause runs.
• Allow to dry for 30 minues.
• Apply another 2-3 coats allowing 30 minutes between each coat.
• Leave the third and final coat to dry for 24 hours before turning the radiators back on.

Note: Always follow the manufacturer instructions found on the tin.

Aftercare & Storage

To keep your finish looking good and remaining tough, regularly clean and dust your radiators.