Overview

Hammerite Satin Direct to Rust Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It's a subtle satin smooth finish which provides a low sheen alternative. Hammerite metal paint is a durable, corrosion resistant decorative coating for ferrous and non-ferrous metals. Primer or undercoat are not necessary for sound surfaces. Ideal for use on metal doors, garden furniture, gates, railings and more. Available in a range of sizes including a handy aerosol spray can for quick and easy application.

• Satin finish
• Ultra tough paint
• Can be applied direct to rust
• 8 year corrosion protection
• Excellent weather resistance

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.

• Remove all loose rust and flaking paint from the metal using a wire brush.
• Remove dirt and dust with diluted detergent.
• For smooth metal surfaces, lightly abrade for maximum adhesion.
• On bare zinc, aluminium and galvanised surfaces firstly apply .
• Cover surrounding areas to catch any overspray or drips.

Application

Before application test Hammerite Satin Direct to Rust Metal Paint onto the painted surfaces and leave for 1 hour. If there is no reaction continue to apply, if there is a reaction with the previous paint all paint must be removed before applying Hammerite Direct to Rust Metal Paint.

• For Bare Zinc, aluminium and galvanised surfaces firstly apply .
• Do not apply in temperatures below 8°C or above 25°C.
• Lightly stir before use.
• Do not thin.
• On previously painted metal in a sound condition 1 coat should be sufficient.
• On bare or rusty metals 2 coats are recommended for best results.
• Ensure all edges and corners are adequately covered for maximum durability.
• On vertical surfaces do not over apply as sagging will occur.

Note: Always follow the manufacturer instructions found on the tin.